About AndresSanchez2854

AndresSanchez2854 · 07-24-2019

Hi, we are going to upgrade ASR 9000 series from 6.2.3 to the 6.4.2. The ASR have 2 RSP each, so we wanted to know if before the upgrade we can remove a RSP to keep the 6.2.3 version, and if the upgrade at some point has issues, we can power off the ...

AndresSanchez2854 · 06-16-2021

Hi @xthuijs, i wanted to ask you a particular case that we are working on.We have a customer that has a L2 service that goes through an ASR 9k. The customer is sending packets with a Default COS and MPLS EXP=7, we see that traffic send to the ASR but...

AndresSanchez2854 · 07-24-2019

Hi Aleksandar why is recommended to disable the fpd auto-upgrade? Is that also true in case of newer IOS XR version too? Best regards

AndresSanchez2854 · 07-02-2019

Hi Aleksandar, great post. We are starting to test in Lab the upgrade of a ASR 6.4.2 32bit to 6.4.2 64bits. Before we start we want to have a collection of database of several resources, like the memory on the line cards and the CPU to have a good id...

Member Since	‎05-24-2019 04:36 PM
Date Last Visited	‎08-19-2022 12:03 AM
Posts	4

User Statistics

User Activity

ASR Upgrade with dual RSP

Re: ASR9000/XR: Understanding QOS, default marking behavior and troubleshooting

Re: IOS-XR Upgrade Procedure

Re: ASR9000 64-bit IOS XR: Increase RAM available to XR VM by disabling ISSU