About fkramarski

fkramarski · 05-23-2011

Hello All,I am trying to upgrade my single server UCM from 8.02 to 8.5.1 (using UCSInstall_UCOS_8.5.1.11900-21.sgn.iso) and am encountering an error. The error that appears is: Error encountered: The requested command [{0}] did not generate the appr...

fkramarski · 07-13-2010

Hello All,I have a UCM version 8.02 utilizing an internal SIP Trunk to an IVR (server). The SIP Trunk functionality works well to the IVR, but if I initiate a transfer from the IVR to an outside number the call fails. The call from the IVR utilizin...

fkramarski · 04-13-2010

Hello, I am currently experiencing some routing issues with SIP Trunks. Here is some background information. I have a CUCM version 7.01 utilizing an internal SIP Trunk to an IVR (server). I am having trouble making outbound calls from the IVR (via t...

fkramarski · 01-08-2010

Hey All,I'm newer to the SIP world with Cisco and have a few basic questions I am having a hard time finding answers for, so please bear with me if the questions have obvious answers that I may have missed.A little back ground.We are integrating a Ci...

fkramarski · 05-24-2011

Hi Christos,Thank you for the reply.I read through the link you provided and I'm not sure there is a match for the description. I am running a different server than whats mentioned in the CSCti52867 note. I have a single server MCS7825H2 and the fi...

fkramarski · 05-23-2011

Hi Christos,Thank you for the reply.Yes, I forgot to include this on the original post.When the install failed and showed the error message on the web interface, the CLI had a repeating scrolling error: EXT3-FS ERROR (Device.SDA6) in Start_Transacti...

fkramarski · 09-01-2010

Hey Marcos,Here are the trace files as requested. I have also included the Wire Shark traces from the calling device and the SIP trunk endpoint.Thank you again for the asistance and please let me know if you have any questions.Thanx...Frank

fkramarski · 08-04-2010

Hey Marcos,Thank you for the reply. The IVR can successfully make an outbound call using the route pattern and out the MGCP gateway, but if a transfer is attempted it fails. If I connect the UCM to an H.323 (the only thing changing being the gateway...

fkramarski · 04-19-2010

Hi gogasca,Thank you for the reply.The SIP trunks are fully functional with the exception of dialing out the PRI trunks. This will be my first go around pulling trace files that are not TSP related traces. Can you provide a little info on what trace...

Member Since	‎12-08-2009 09:21 AM
Date Last Visited	‎09-07-2018 11:51 AM
Posts	11

User Statistics

User Activity

Upgrade from 8.02 to 8.51 Install Fails

Calls will not transfer from SIP Trunk to MGCP gateway

SIP Trunk Cannot Make Outbound Calls

SIP Trunk Specifics

Re: Upgrade from 8.02 to 8.51 Install Fails

Re: Upgrade from 8.02 to 8.51 Install Fails

Re: Calls will not transfer from SIP Trunk to MGCP gateway

Re: Calls will not transfer from SIP Trunk to MGCP gateway

Re: SIP Trunk Cannot Make Outbound Calls