Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All the information you ask for is contained within my post.If you need to know the features of ME for the release (such as RF groups) please look it up.If you need to know if I changed anything other from default after factory reset other than what ...
As I posted, I tried various firmwares including latest and recommended (Cisco's suggested release). Please see Cisco's software portal for the release numbers.
I have the APs for a further 24hours or so, I can test any configuration you wish. Fresh retest this morning: 2 x AP2802i, Mobility Express 8.5.140.0 (Cisco’s suggested release)1: factory reset2: CiscoAirProvision Settings: Employee network (default)...
I evaluated Mobility Express (AP2802i and various firmwares including latest and recommended) and found roaming totally broken on most devices.. the clients simply would not roam, even under extreme RF design e.g. 15dB above/below the known roaming c...
I had this problem looking for compatible inexpensive 3rd party POE+ injectors and POE+ switches, until I discovered:• Trendnet TPE-115GI POE+ injector• Zyxel GS1900 POE+ switches These work fine with the AP2802i, hope this saves some of you time an...
