Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a Cisco 891 configured as an EzVPN client to a service provider gateway. We have a requirement to provision a second VPN tunnel to an ASA 5512X. We would like to use a standard site-to-site IPsec VPN for the second tunnel to the ASA5512X. ...
I want to be able to track dialup users; when they they log on and when they log off, to a syslog server. I am currently doing this with debug aaa authentication and logging debug traps to a syslog server. This produces many more records than I wou...
Our primary WAN link is thorugh an ADSL serivce, with our backup through ISDN. How can I trigger the ISDN dialer when the ADSL service (route) failes yet the ADSL interface does NOT go down? Without using any dynamic routing protocols, eg dialer wa...
Terrance,
I have successfully configured and tested this solution in my lab using and ASA5510 for the original EzVPN server (9.1(2)), a ASA 5506 (9.3(2)2) for the IPsec VPN tunnel remote, and a 1941W (15.1(3)T) for the client with both the EzVPN and...
Thanks Terence. I found an article with a similar configuration to yours. However the existing EzVPN we have inherited is different (I will upload an example tomorrow). I have configured it with two crypto map statement on the outside interface (s...
Thanks for you reply. I am wanting to do this on 2600 platforms, and without the modem modules (simply using external modems on serial interfaces). So Call Tracker is not an option. I am looking further in to the other option mentioned.
On all of the tunnel interface I have worked with, tunnel interface doesn't actually go down unless the source interface goes down? Therefore it wouldn't trigger the backup interface. Am I missing something here?
