Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So here is my problem. The firewall does not have a VDSL modem. So my solution is to use a 887VA-K9 in bridged mode on port Fa0 to pass the ISP VLAN onto the WAN interface of the firewall so the firewall gets the public IP via DHCP and handles NAT.Th...
Hello Giuseppe, Thank you very much. I finally got working after working on it all weekend.I will write up a guide on how I got it running from start to finish and give you your due credit. After running the following commands my problem was resolved...
Hello Giuseppe, Thanks for the quick reply. I have a follow up question. I ran through your instructions and it looks like the interface fas0/0.10 command did not quite work.I have not yet tested the config so please let me know if the fas0/0.10 comm...