Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to protect an internal network from another internal network on the same subnet with a cisco 5505 firewall. I don't know if it is possible with the conifguration my boss would like to implement but I have attached a jpeg photo of the layo...
I have set up a DMZ with a web server on a host behind a Cisco ASA 5505 firewall version 8.2 (5)
I set up security levels and can access the web server in the DMZ from the inside vlan interface (192.168.5.12)and RDP to the host on the outside vlan i...
I have a Cisco switch that has a couple VLAN's, VLAN 10, 50 and VLAN 1000. The previous two can be pinged but I am unable to ping VLAN 1000. I am not sure if it is the numbering scheme that is the issue or if I have to go digging some more to solve t...
My traffic from the inside was not getting through. I ran packet-tracer and NAT was blocking the traffic. I removed the NAT statement and my traffic went through.
I then added an ACL to permit port 80 traffic and applied it to both interfaces then h...
What kind of license do you have on the firewall? You can pull up the information by using show version command. The issue I see right off the bat is your only allowed so many vlans (2 that are unrestricted and one that is restricted)[usually inside,...
