Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I am tryning to run a python script from a eem to send an email and I notice that I am no capable of running any cli command from the eem.
eem example:
event manager applet sendemail event cli match "conf t" action 0.5 cli command "enable" actio...
Hi, Anybody knows what can be the cause of following error? %URIB-4-RTDEL_ERROR: urib [3568] (default-base) Could not find prefix 192.168.1.2/32, client "am"'s delete request I did not find any information in the error output decoder. According with...
I have a architecture that uses ACE to do Firewall Load Balancing. I need to add a static map of a VIP IP to a multicast mac address (Microsoft servers with NLB in multicast mode). The ACE does not accept multicast mac address in the static arp state...
Hi,I have a costumer that has a wireless network with a WLC 4400 (ver 6.0.182.0) and several Aironet APs (1250 version 12.4).He also has a Wireless IP Phone. The IP Phone loses the communication with the LAN very often.In the WLC logs we can see the ...
The syntax provided by you doses not seem to be correct for the nexus 7000:
(config-applet)# action 1 cli ?command Cli command to executelocal Execute the action in the same card on which the event happens
with the following eem:
event manager applet...
Hi,
I do have aaa configured.
If I run the applet I do see that the "action 3 cli command "sh version >> bootflash:shver.file"" did not run (bootflash empty).
If I debug aaa while running the applet I do see an accounting log but I do not see any au...
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/system-management/guide/b_Cisco_Nexus_7000_Series_NX-OS_System_Management_Configuration_Guide-RI/configuring_the___embedded_event_manager.html
this seems to be valid only for chan...
Hi,
the "system-policy" does not exist:
event manager applet sendemail override system-policyERROR: parameter is invalid or too long
event manager applet sendemail override ?WORD Name of the system policy to override - should begin with double unders...
Hi,
The command "event manager applet XXXXXX authorization bypass" does not exist in nexus 7000 (at least in my version 7.2(1)D1(1)).
N7K-ADMIN-N7K601(config)# event manager applet sendemail ?<CR>class Specify a class for the appletoverride Override...
