Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Community, I hope you could help to me with the next issue, I have 2 APs 3800E series and an one virtual WLC with IOS version 8.5.161.0I will to try to signing the APs to vWLC but in the console port from the AP display me the follow messges: [...
Buen día, tengo el siguiente problema. Al conectar un equipo (ACU) que requiere PoE, el puerto no levanta (down/down) y no obtiene PoE, se realizaron pruebas conectando otro equipo (AP) al puerto y funciona sin problemas. El ACU se conecta a otro Swi...
Hello Community, Thanks for you help!, I justed solved this issue, I mean I changed the subnetwork in others words the original network it was vlan 200 there's no DHCP so I changed to vlan 210 with DHCP. The APs download information from the vWLC; I ...
I try to change the time and date but the follow are the permit commands:APCCDB.93C9.6A82#Exec mode commandsap-type Set the access point typearchive Archive commandscapwap CAPWAP exec commandsclear Reset functionsconfigure Configure parametersconnect...
Hi Leo,Thanks,Yes that log I took in that days, so I connect the AP and the output is the next: [*08/20/2021 15:30:00.0003][*08/20/2021 15:30:00.0003] CAPWAP State: DTLS Setup[*08/20/2021 15:30:57.0359][*08/20/2021 15:30:57.0359] CAPWAP State: DTLS T...
