Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day, Faced very interesting problem connecting ASR9901 with Catalyst 9500 48Y4C over 100G LR4 optics.Links between two 9901's or two 48Y4C's are raising fine, meanwhile link between any router and any switch is dead.Troubleshooting different con...
Good day,Trying to raise BGP on ASR 9001 config is as follows RP/0/RSP0/CPU0:asr9k-01#show running-configThu Aug 15 13:35:04.107 BakuBuilding configuration...!! IOS XR Configuration 6.5.3!! Last configuration change at Wed Aug 14 18:06:49 2019!hostna...
Need to redirect all web requests from PPPOE users destined to 192.168.99.9 over another gateway 172.16.1.1 using an old 7200 router. Below is my config, router also participates in OSPF and iBGP with its neighbors. Cisco IOS Software, 7200 Software...
Thanks for reply Giuseppe, Creating an additional Loopback didn't help. However moving all config to global did the job. Regarding licensing, this router has only one BNG license installed, so probably you're right and this is a license issue. Thank ...
Just did it the way as was explained, and even reloaded the router.So, this is already a part of the config. router bgp 12345address-family vpnv4 unicast Regarding Core VRF, router is not in production yet, and this model is just playing around. Than...
Paul, I need any host requesting 80 from 192.168.99.9 (masked for publication) to be routed over 172.16.1.1 (also masked). 192.168.99.9 is located on the Internet, I've created a fake web-site with this IP in internal perimeter which is accessible ov...
