Hi Gnanavel,You need bba-group instead :http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftpprfls.htm#wp1088274http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541b8.h...

Hi,If you could upload the following debugs, it would be more helpful for the audience:debug dialerdebug isdn q931 (disregard if its T1/CAS)debug modemdebug csm modemdebug chatdebug ppp negodebug ppp authendebug aaa authendebug aaa authorizdebug call...

Hi Dragan,Virtual profiles is an option :http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00800ca729.htmlThanks and Regards,~Zulfiqar

Hi Eduardo,Doesn't look like your credentials are recognized by your ISP because each time they NAK it when you send them CROS58897973@ae.cr :Vi2 PAP: I AUTH-NAK id 44 len 22 msg is "Invalid Password."Please check with them again.Thanks and Regards,~...

Hi Dan,WIC-xAMs are sensitive to line voltage. So you might want to try a different phone line on it and see how that works. By the way, if you are reverse-telnetted into the WIC, and now you dial in, do you see RING ?Also try to dialout from reverse...