Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm slowly getting this together, but I keep tripping.I have an ISR4331 at our main office. There are two WAN connections (ISP1 and ISP2). ISP1 has 6 IP addresses, while ISP2 has only the one. In-house, I have a pretty large array of networked equipm...
I am trying to build and deploy a new-ish ISR4321/k9.it came packaged with isr4300-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin but the reseller provided us with isr4300-universalk9.16.09.04.SPA.bin.a quick copy from USB and we're upgraded.This new ...
We have an ISR4321/k9 installed at one of our colo's and it's been working just fine for the better part of two months. recently we started having issues with traffic suddenly not getting through. I can still telnet into the router from an external I...
We have a /28 block of public IP addresses pointed at one of our colo locations. We're using nat to pass port specific traffic through to individual servers behind the router which is an ISR4321k9.There were a few bumbs but we have things working for...
This is a continuation of this post...So we have deployed into the colo this last weekend and everything is operational... mostly...I have a stack of IPs for the equipment in the rack and I have assigned them to the router's gi0/0/0 port (as secondar...
@Georg Pauwen wrote:Hello, you could also automate whatever you are doing manually by configuring the two EEM scripts below. One would run when the SLA is down, the other one when it is up:negative. the eem script KINDA worked...I set it up small at...
@Georg Pauwen wrote:Hello, you could also automate whatever you are doing manually by configuring the two EEM scripts below. One would run when the SLA is down, the other one when it is up: event manager applet TRACK_8_DOWNeven track 8 state downact...
@paul driver wrote:HelloDoes your tracking initiate by any chance?Try adding the following so that monitored ip address is reachable via ISP 2ip route 100.100.100.255.255.255.255 gig0/0/0 100.100.100.25ip route 100.100.100.255.255.255.255 null 0 10co...
@Richard Burts wrote:You mention a vpn. But I do not see anything about vpn in the config that you posted. Can you tell us more about the vpn? Where is it running?client vpn, using openVPN. nothing within the router itself. @Giuseppe Larosa wrote:Hel...
This is an old thread, hopefully someone will spot this... I'm having this issue but it's in a colo so my working options are limited...I assume that removing the overload statement I have will drop my connection but I really need this port translate...
