Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
If we have a switch that has the following vlans 10-Data20-Vlan192 -Management Let say we are ssh connected to this Layer 2 switch using the management vlan 192.168.0.2 and we try to ping a server on the 10.10.10.50 address. Does the ping from within...
What would be the effects of the following: router eigrp 100network 10.1.40.0 0.0.1.255network 10.1.42.0 0.0.0.255 Would this cause any routing issues or dropped packets?
client=====[router1]====[router2]====[router3]=====[router4-gre/tunnel ]===[gre/tunnel router5]===server What is the best way to troubleshoot/identify which router in this path is blocking a udp response from the server to the client? I am able to ge...
I have the following setup: [client 10.1.20.0]---inside--[asa fw]-outside------[server 192.168.0.0][client 10.1.30.0]-----inside--^ Essentially two separate networks connected to the asa firewall on the inside and one on the outside.The 10.1.30 subne...
How can I capture all drops to one host that are being dropped using the type asp-drop. I know I can use the keyword all. But this gives an overwhelming capture of packets...
Hmm...I ran it but it comes back as allow. Result:input-interface: insideinput-status: upinput-line-status: upoutput-interface: outsideoutput-status: upoutput-line-status: upAction: allow
Interesting....I'm getting the following when I use that command: 2926: 06:06:03.470480 10.10.30.58.64691 > 172.16.2.5.9000: R 3855413837:3855413837(0) ack 2423687647 win 02927: 06:06:03.471807 10.10.30.58.64688 > 172.16.2.5.9000: R 1493989444:149398...
Thanks for the help...however....notice im trying to connect from the 10.20 network. I can ping the outside server fine but it doesnt connect. The 10.30 connects fine all the way.
