Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a wireless network that works perfectly for normal laptop and tablet wireless. It authenticates to a RADIUS server, routes traffic properly, etc. I have found that the wireless assist feature on iphones is extremely problematic. Does anyone kn...
I have a WLC 3504 at a central location and six sites that use it, including the site containing the controller. The controller has an Internet breakout on port 2 and LAN access on port 1. I am looking at implementing Flexconnect and have been throug...
I am trying to set up a very basic network on a WLC 3504. I want it to use web auth with a SSLcertificate signed by a 3rd party CA. The cable plugs in to port 2 on the WLC and goes out to the Internet using a dedicated port on the CPE on VLAN 11. Thi...
I have a guest network set up that is completely isolated from production, the intent being that visitors are issued a username and can go out to the Internet while they are visiting. I'd like to fix one thing: The visitor connects to the wireless ne...
I have a WLC 3504 and it works well with my first network attempt- I had set up a guest network. Clients connected to it receive an IP address and can access the internet. This network is isolated from our production environment, but was almost as ea...
Thanks everyone for the help. I ended up solving this on my own, and here is how:Since the connection is isolated directly out to the Internet, the client needed to ask a public DNS server where to get the webauth page. So I added a record to my publ...
Thanks for the advice! Tried this and now I can connect... but it skips the web auth login page... my WLC is properly handing out the 192.168.111.0/24 addresses to the clients that connect to the SSID, and I have Internet access from the SSID. I’ve u...
I could not post text below the pic for some reason. I will eventually want to be able to reach 192.168.3.0/24 from clients on the 10.10.30.0 network, but I am just trying to get 192.168.1.0/24 communicating properly first. Any ideas? I included a l...
I think I am getting close to sorting this out... We have multiple problems, but the first one was the failure of the AP's to associate. To clarify what we are working with, it is 5 Aironet 1832i AP's at the remote site and one WLC 3504 located where...
