Hello everyone,, I have an 1832i AP at a remote site with IP address in the 192.168.13.0/24 range. It was set up originally as ME and I tried to change it to CAPWAP, but that failed and the AP's on site are now not broadcasting SSID's. I have been trying to force it to AP 192.168.1.68 by priming, also by using DHCP option 43 and 60.... Do I set sub option 102 or 241? DNS is not an option for this implementation. Do I need to do a factory reset, and if so, how do I do it over CLI? I have full admin access over the network, DHCP server is Windows Server 2012R2.
... View more
Hello everyone,, One of our MPLS Circuit Continuously Fluctuating. Our Environment like PE (Alcatel) to CE (Cisco) Router. This fluctuation will Reset the BGP Session with following logs (BGP state went down and after some seconds automatically become up) Sep 27 02:39:44.638: %BGP-3-NOTIFICATION: received from neighbor 10.XX.XX.XX 4/0 (hold time expired) 0 bytes Sep 27 02:39:44.638: %BGP-5-NBR_RESET: Neighbor 10.XX.XX.XX reset (BGP Notification received) Sep 27 02:39:44.642: %BGP-5-ADJCHANGE: neighbor 10.XX.XX.XX Down BGP Notification received Sep 27 02:39:44.642: %BGP_SESSION-5-ADJCHANGE: neighbor 10.XX.XX.XX IPv4 Unicast topology base removed from session BGP Notification received Sep 27 02:39:44.698: %BGP-5-ADJCHANGE: neighbor 10.XX.XX.XX Up With Regards,.
... View more