I have an 1832i AP at a remote site with IP address in the 192.168.13.0/24 range. It was set up originally as ME and I tried to change it to CAPWAP, but that failed and the AP's on site are now not broadcasting SSID's. I have been trying to force it to AP 192.168.1.68 by priming, also by using DHCP option 43 and 60.... Do I set sub option 102 or 241? DNS is not an option for this implementation. Do I need to do a factory reset, and if so, how do I do it over CLI? I have full admin access over the network, DHCP server is Windows Server 2012R2.