Hi Guys,I need your help on how to limit the bandwidth from 200Mbps to 100Mbps burstable to 200Mbps facing end customers interface? Is there any command on how to set this up? I tried the Class-Map with Policy map but when I'm in the pmap-c "police" ...
I need help on how to check this error on my cisco router ISR 4331. and why it's appearing on my router logs. Thanks Apr 7 10:30:25.272: %PLATFORM-4-ELEMENT_WARNING:smand: RP/0: Committed Memory value 91% exceeds warning level 90% Version: Cisco ...
Hi, I would need some assistance on how to configure 2 outside interface. Each ISP (outside) interface have /28 IP Address and the other one is /30 IP Address. My intention is to put the servers behind the FW so each ISP is related to one of the insi...
Attached is the current infra but we're getting attacked with several ports I tried to set an access list but when I set the configuration there's no hitcount when I show run the access-list. something is not right even the access-list OUT_IN extende...
Hi, I would like to know if this is possible to configure multiple public IP's to single private address using ASA 5515? Please advise. If yes, please let me know how to configure it the easiest way
#show platform hardware throughput levelThe current throughput level is 500000 kb/s #show interfaces gigabitEthernet 0/0/3GigabitEthernet0/0/3 is up, line protocol is upHardware is ISR4431-X-4x1GE, address is cc16.7eb1.f113 (bia cc16.7eb1.f113)Descri...
Hi Leo, this is the log at this moment *Apr 16 09:29:25.246: %PLATFORM-4-ELEMENT_WARNING:smand: RP/0: Committed Memory value 91% exceeds warning level 90%*Apr 16 09:31:11.301: %PLATFORM_INFRA-5-IOS_INTR_OVER_LIMIT: IOS thread disabled interrupt for 1...