Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey everyone, I wanted to ask a question here because I haven't been able to find anything similar to what we're trying to accomplish. We have an SSID that is nearing the cap on available IPs in our given subnet, and due to another SSID being right n...
Hey everyone, I am having an issue applying a policy map and wondering if I could have some help. I wasn't able to figure out my specific issue after searching so I apologize if I missed it. A copy/paste from my config: Policy Map QoSPolicyMapClass h...
Agreed. I don't fully understand why they wouldn't just request a new IP, as changing a vlan on a switch for example with an end device connected generally gets resolved pretty quickly in terms of the end device requesting a new IP and getting connec...
Yea that is what I tried. I did leave that part out I apologize but my testing process was to stand up the new SVI and subnet on the L3 switch, create the DHCP scope, ACLs, ect, and threw up a test SSID with that vlan assigned with proper IP/netmask/...
I have re-created your recommendation and will be trying this later tonight. Thank you for your input - I'm still new to QoS and didn't think it would work like that. Reading another similar issue on this forum gave similar insight so I guess I simpl...
Thank you for the reply, I had left those out as I assumed the issue was with my policy map instead. Here is the config of my class maps: Class Map match-any voip (id 32)Description: matches the current avaya dscp valuesMatch dscp af41 (34) ef (46) C...
