Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My environment contains 4 seperate controllers. 1 controller in the datacenter which remote offices use with HREAP and discover this WLC using DNS We will call this Controller WLC1. 2 more controllers (WLC 2 and WLC 3) in the corporate headquarter...
Hello all,Goal: Setting up a new multifloor building and the goal is to have total ability to roam between floors without dropping connections using the follwing:5508 controllers1142 LAP'sLayer 3 connected network EIGRP between floorsNo layer 2 trun...
Here is my situation. I am running a new WLC 5508 with 6.0x code and the controller is housed at the data center, the remote building has a high speed point to point link. I have no issues with the LAPs connecting but clients are not getting IP add...
I have 7.1.3 Unity system and the problem I am having is when an external caller goes to voicemail they are allowed to talk for exactly 60 seconds then the call will drop, no warning, or nothing. Internal users calling between each other can leave o...
I understand that all and here is a screen shot (see attached) of an ap that was on WLC 2 last night at midnight when i wrote this orginally and now how jumped to WLC 2.. The major issue here is that WLC 1 does not give out DHCP because it is used f...
Yes this was the answer. The concept I was missing in all of the WLC configurations was Dynamic interfaces attached as you said to a L2 vlan. The switch port then has the trunks for those accepted vlans.Thank you,
Ok here is an upate after getting TAC to give me some help. You are correct because I had to enable HREAP mode on the access points and define the local VLANS to the branch office. This idea was escaping me and makes much more sense. It also lets m...
This is a bump.I am having the same issue. here is my configuration / setupHere is my situation. I am running a new WLC 5508 with 6.0x code and the controller is housed at the data center, the remote building has a high speed point to point link....
