Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Topology: both subnets 1.1.1.0/24 and 2.2.2.0/24 are somehow connected to asa5520, but to different interfaces. Say 1.1.1.0 is inside network, and 2.2.2.0 is outside network.When we want to allow outbound traffice from 1.1.1.1 to 2.2.2.2 through port...
Hi Jan,Thanks for your quick response.It will be helpful if you could explain in a bit more details. How are the two services different? Both smtp port 25 and telnet port 23 are tcp ports, at transport layer.So,1. if I only have the following two lin...
Hi Rob,Thanks for your reply.If I do:interface GigabitEthernet0/1nameif soundsecurity-level 50ip address 10.10.100.1 255.255.255.0ip address 10.10.200.1 255.255.255.0 secondary!and connect the D-Link to router interface GigabitEthernet0/1,will end us...
Hi NT,Thanks for your reply.So if I want the end users connecting the D-Link switch, to be in vlan 100,I don't need to have subinterface at all. I just need to make native vlan ofinterface G0/1 as vlan 100:interface GigabitEthernet0/1encapsulation do...
