Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey.I have some pnp problems booting up a ie3300 switch. For some reason it gets the ip-address but not the tftp bootstrap file - using option 150 (it works on vlan 1) I have change the pnp to startup i vlan 5. 1: After the DTP (trunk negotiation is ...
Hi. Do I need to request 2 licenses for every appliance (HA-setup) - Because I am getting the following error:Licensing HA configuration error:Reservation type in active and standby does not match Or will just one license do? If so, what's the proble...
Why is the AP1541 Authenticator sending an incorrect Access-request packet towards the Radius server? It seems the server doesn't know how to respond. But if I do a "test aaa radius from the WLC - the server response. please see attachment /Q
ZTP-MASTER#dirDirectory of flash:/639026 -rw- 432 Jul 29 2020 12:38:03 +00:00 bootstrap.config11353194496 bytes total (7792627712 bytes free) ZTP-MASTER#show run | s tftptftp-server flash:bootstrap.config______dhcp config:ZTP-MASTER# show run | s dhc...
ZTP-MASTER#show run | s dhcpip dhcp pool pool2network 10.0.0.0 255.255.255.0default-router 10.0.0.1ip dhcp pool pool1network 10.1.1.0 255.255.255.0bootfile bootstrap.configdefault-router 10.1.1.1option 150 ip 10.1.1.1 3300 output afterwards:Base Ethe...
Hi Paul - I already did that - using 2 pools because the switch should automatically download new image to the IE3300 and also the startup configuration.. when the phase 1 of the script is finished it will boot-up once again and validate certain thin...
