About MPuyales20

MPuyales20 · 08-24-2016

Need help in addressing High CPU Utilization of a 3750-48PS-S switch. SNMP Engine is at 85%.

MPuyales20 · 08-02-2016

Hi Cisco Support Community. Equipment Cisco 5508 - 8.0.121.0 I am having an issue when accessing my clients WLC via GUI. It was installed April 2016. I can access it before via GUI (HTTPS). But now, I can't access the Cisco WLC Login page. I am usi...

MPuyales20 · 08-24-2016

Hi Marvin. Its currently at 12.2(35) SE5. I've seen that the End-of Support was July 2015. Here is the part of the "show process cpu sorted". CPU utilization for five seconds: 98%/3%; one minute: 96%; five minutes: 98% PID Runtime(ms) Invoked ...

MPuyales20 · 08-02-2016

Haven't tried. I'll do check. Any other suggestions? Thanks

MPuyales20 · 08-02-2016

Hi Sandeep. LAG is disabled and there is no Port-Channel configuration on the switch. Additional info. The WLC is located on the client's remote site. I am trying to access it on the client's HQ. The WLC is accessible via GUI when I use a desktop ...

MPuyales20 · 08-02-2016

Hi Leo. Yes I can SSH.

MPuyales20 · 08-02-2016

This is the message in the browser "This page can't be displayed Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://<ip address of WLC> again. If this error persists, it is possible that this site uses an unsup...

Member Since	‎03-30-2016 07:31 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

SNMP Engine Process High CPU

Cannot Access Cisco 5508 WLC from GUI

Hi Marvin.

Haven't tried.

Hi Sandeep.

Hi Leo. Yes I can SSH.

This is the message in the