Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have configured a SCEP server and downloaded and imported the certificate:crypto pki trustpoint XXXXXenrollment mode raenrollment url http://xxxxxxxxxxxxxx:80/x/x/x/x.dllusage ssl-serverserial numberip.address x.x.x.xvrf Mgmt-vrfrevocation-chekc cr...
Forgive the longevity of this post. We have an ACAS scanner that using a hard coded PIN to scan our network elements. The PIN is then passed to an RSA server via RADIUS. All of the scans to ASR1001-Xs work, but the scans to switches sometimes succeed...
Unfortunately, that attribute is not configured. I remember messing with that attribute on setting up the device access login, but it is not in the sh run or sh run all. We are leaning towards it being a problem on the scanner as we switched one of t...
Super old thread but if anyone runs into this problem the likely culprit is the use of VRFs. See the following link. https://www.cisco.com/c/en/us/support/docs/security-vpn/remote-authentication-dial-user-service-radius/113666-tg-ios-per-vrf-00.html
