About tomtomek99

tomtomek99 · 04-01-2016

Hi all, I have a problem with Cisco SPA112 ATA. I can make calls no problem. When someone calls the number configured on ATA, analogue phone attached to ATA rings but when I answer, I do not hear anything. The calling party still gets the waiting to...

tomtomek99 · 04-03-2016

Got a managed switch to intercept SIP packets but before running wireshark I tested the calling once again. Suddenly it works. It must have been the remote end provider issue then as you suggested. Thanks for your help on that matter.

tomtomek99 · 04-01-2016

There are probably other providers offering better support but I am in this position at the moment and want to get this sorted as I think this is ATA setting that is causing the problem. My feeling is that the 'answering' or acknowledge packet/signal...

tomtomek99 · 04-01-2016

The problem is I have little support from the provider unfortunately. I will get some managed switch tomorrow and try to capture SIP packets. Thanks for your help so far.

tomtomek99 · 04-01-2016

Ok, I have run the syslog server with timestamp - indeed this helps. The BYE command is issued after some time - when the call stops from mobile to VoIP number. The disconnection happens indeed on the remote side but after 'no answer'. New log attach...

tomtomek99 · 04-01-2016

I have just used zoiper free client on the same network and I am amble to make receive the calls behind the router I am at. is there any option on the SPA112 that can be adjusted maybe? I was reading that sometimes handset voltage signal has to be ad...

Member Since	‎04-01-2016 06:21 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	9

User Statistics

User Activity

SPA112 not answering calls

Got a managed switch to

There are probably other

The problem is I have little

Ok, I have run the syslog

I have just used zoiper free