I found two data sheets that are not the same. The first one told me it does not support PA-VXC-2TE1+ and the last one told me it does.... very confusing.Thank you
I just see this link : http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t8/dtnbarad.htm#1079748and try to set router to control bandwidth from KaZaA. I used IOS version 12.2.13 on router 7200 and put these setting in c...
We just install a new AS5350 for Modem Access in campus. It is connected with Catalyst 6500 core switch and use E1(isdn) for connecting with Telephone Organization. We have 2 problems about it.1.When we dial to AS5300 and get authentication by radius...
I just deleted my old IOS (c7200-boot-mz.120-9.S.bin) and found that the new one (such as 120.10.bin or 120.18s.bin) could not use for my 7200 router. So, how can I find and download the old boot image? (c7200-boot-mz.120-9.S.bin)Thank you.
Thank you for your suggestion. I just do it following your instuction but it still doesn't work. class-map kazaa2 cannot match any kazaa2 packet and kazaa2 can use. I don't know why.
Actually, local pool will assign IP address because we set Radius like this:DEFAULT Auth-Type = System, Group = "iec", NAS-IP-Address = xxx.xxx.xxx.xx, Called-Station-Id = xxxxxxx, Yard-Max-Monthly-Time = 60, Yard-Simultaneous-Use = 1 Service-Type = ...
Thank you very much for your help. However, in listed file shows c7200-boot-mz.120-9.Sa. Does it same as the one that I want (c7200-boot-mz.120-9.S.bin)?
