Hello,We are having issues with our Cisco ACE 4710, it suddenly stopped to telnet admin context.We are able to telnet another context from the same appliance, but unable to telnet the admin context. Is possible to pings the gateways from the other co...
Hello Guys,We are having a connectivity issue on two contexts on our cisco ace 4710 (routed mode).We arent unable to start a communication (Ping/telnet and etc) between two server in differents vlans on the same contexts... however it is possible to...
I need to config forwarding calls if some extesions did not answer.If someone call the extension 9914 and got not answer after 3 rings it have to redirect to 9172 and 9171. If someone call the extension 9171 and got not answer after 3 rings it have ...
Hello,We have a vpn L2L with an ASA and C2900 and always stopping to ping each other but the vpn still UP and can each the others devices behind the peers.Everytime we have to issue on router "clear cry isa peer" or on asa "clear ipsec peer" to start...
Siva,From a server on vlan 102 on context Issue to a server from vlan 18 on context test, I can see the packets and that communication is OK.Even testing the servers on the same context Test on different vlans I cannot see any packet hitting the inte...
Siva,I did the two captures on both vlan interfaces 102 and 3 "From Server 9.193.46.250 (vlan102/Context Issue) to 9.241.45.100 (vlan 3/ Context Issue)"And cannot see any packet hitting the interfaces, with the above icmp test.Any idea?
Siva,As per the servers that I have mentioned:Default gateway is the ACE.VLAN 102 GW9.193.46.1VLAN 3 GW9.241.45.1That is so strange, communication between the context is working well... however communication on the same context is not working.
We did a test with the servers on the same context with no response.:From Server 9.193.46.250 (vlan102/Context Issue) to 9.241.45.100 (vlan 3/ Context Issue) From Server 9.193.46.250 (Context102/Context Issue) to 9.241.45.200 (vlan 3/Context Issue)Co...
Hello Karl,We already solved this issue applying the following commands:sysopt connection preserve vpn flowscrypto isakmp nat-traversal 20Try it and let us know