About mrdorshimer

mrdorshimer · 04-20-2011

We run a 100 Mbit trunk over 62.5 MM fiber to a remote building. We replaced the building’s single switch.Old:2950C-24 switch with integrated 100BASE-FX optic using a MTRJ to SC fiber patchNew:2960S-24TS-L and GLC-GE-100FX= SFP optic with LC to SC fi...

mrdorshimer · 10-26-2012

We are experiencing a similar issue since the upgrade to iOS 5.1AppleTV 720p and 1080p with iOS 5.11262 and 3502 Access PointsWiSM-2 controllers with 7.2.103.02960s and 3560g Switches for AP uplinks on 12.2(58)SE1 and 12.2(55)SE4 respectivelyISC DHCP...

mrdorshimer · 01-31-2012

Sorry to bring this one back form the dead - I'm also running 7.0.98 code WiSM and getting this alarm for a 1220 AP. All auto containment options are disabled.

mrdorshimer · 04-21-2011

so far so good..."no duplex" followed by "duplex full" has worked on my test bench, from a 2960 to 6509 and between a pair of 2960's. I will test in production shortly and report back.Update:That suggestion works in production. Have you seen somethin...

Member Since	‎11-01-2010 06:06 AM
Date Last Visited	‎07-31-2019 08:42 AM
Posts	4
Total Helpful Votes Received	5

User Statistics

User Activity

GLC-GE-100FX= SFP in 2960S-24TS-L only running half-duplex

Re: Apple TV 1080p ios5.1 Connectivity

Rogue device detection

Re: GLC-GE-100FX= SFP in 2960S-24TS-L only running half-duplex