Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is anyone else seeing issues with their 5508 WLC on code version 8.2.111.0? We did the upgrade in order to support the new 2802/3802 access points and have been seeing some strange issues ever since. The most problematic issue has been that 3702 and ...
Is it possible to reboot multiple or all wireless access points via the WLC web GUI or Cisco Prime at one time? If so, can it be scheduled? I would prefer to not have to reset each and every access point individually. Thanks!
Hello,We are having a strange issue that we can't seem to track down and I was hoping someone could help point us in the right direction. Previously we were using a 3725 ISR integrated with our Hicom 300 and calls between the two were working fine, b...
After some further testing, we have noticed that other PBX extensions are getting through to these same VoIP extensions. We opened a case with tac and provided them with debugs and this info. It seems as though they are hitting the same dial peers wh...
Alex,We've confirmed connectivity and some calls are going through the PRi and on to the VoIP extension. For example: If a user calls from a cell phone (or dials out of the PBX) to one of the VoIP DIDs the call gets there. I've attached a debug of th...
I'm gathering that information now. I should also mention that when SRST mode is in operation, it seems to work fine. It almost seems like that when it isn't working it still picks the correct dial peers, but call manager isn't accepting the 4-digit ...
