Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hia CUBE can perform CAC for sip calls, but only for calls going through OCS mediation server. if your MOC users are located anywhere in the network, the internal call legs and also cal legs from MOC to mediation server will be without CAC.The bandwi...
Hi.if you are using remote call control you need to use a Application Dial Rule to strip the "+" sign.se the guide on the interoperabillity portal.http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/617030nt.pdfif you just want to c...
Hi. your design should work.Tra to debug ccsip messages on the gateway to se if the correct sip messages are sent.the gateway is a CUBE (IPIP GW) in your design.you shold check the config giudes for this, and shoud make shure thet the CUBE is configu...
Hi Joseyou have to deal with the "+" to/from OCS mediation server.We have configured this and it works.the config look like this:(XX. is the prefix for number on OCS)voice translation-rule 11 rule 1 /^\+/ //!voice translation-rule 12 rule 1 /^\.*/ /+...
HiThere is an example of this at the interoperability portal.link:http://www.cisco.com/en/US/netsol/ns728/networking_solutions_products_generic_content0900aecd805bd0e4.htmlTore
