Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a scenario where APs connected to 2 types of WLC (AireOS and IOS-XE) will co-exist in the same physical place. The APs use flexconnect and local switching. Is IRCM necessary in this scenario? How seamless will intercontroller roaming be, w...
Hi, I am running multiple WLCs with version 8.10.151.0, both the virtual model and model 3502. I have a WLAN with 802.1X authentication and I want to enable Fast Transitioning (802.11r), but I also want clients not supporting 802.11r still be able to...
Hi, Do controllers in an N+1 HA setup (different geographic location) need to be in the same mobility domain for AP failover to work? It seems like some documentation mentions this and some does not. Can anyone confirm if it is necessary? Thanks in a...
Hi, I have the following two setups: Setup 1:1 vWLC in US with all AIR-AP2802E-B-K9 model APs1 vWLC in Mexico with a mix of AIR-AP2802E-B-K9 and AIR-AP2802E-A-K9 model APsBoth controllers should be the backup for each other (N+1 setup) Setup 2:1 vWLC...
Hi, I have been trying to set up wired CWA with ISE, but URL redirection is not working.Switch is a WS-C3850-12S, IOS XE version 16.12.3. MAB authentication and device tracking seem to be working: LAB-CORE-SW01#sh authentication sessions int g1/0/6 d...
Just for anyone who still hesitates on what to do:I just updated a 5508 controller from 8.5.161.0 to 8.5.176.2 (an IRCM release) with AP bundle.I downloaded the AP bundle to the WLC after the software download and without a reboot in between.So downl...
Thank you for taking the time to help! Customer is running 2 5508 controllers and one 3504 controller. Version currently used is 8.5.161.0 (because some old APs must still be supported) but the plan is indeed to upgrade to the 8.5IRCM version and bui...
My apologies, models are vWLC version 8.10.151.0 In the document you provided, there is no mention of mobility groups. However, in the following document there is: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-8/config-guide/b_cg88/high...