Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,For a small office of 50 people, we have a server room with 2 MS350-48FP stacked using the stack ports and stack cables at the back of the devices.The stack is connected to 2 Internet lines and provides Internet access for client machines and Wi-F...
Hi I have 2 questions: We have 2 ASA 5525 that are setup for failover. Site A ASA was always the primarySite B ASA was always the secondary Today I logged to Site A ASA and noticed the config had changed to secondary.My first question is: can this ha...
Hi all, I have 2 questions I hope you could help me with. We have a 2 nodes active/passive ASA setup (ASA 5525 running OS 9.9(2)), it used to run stable but now for some reason every night at the same time there is a failover happening. 1.It's always...
Hello, It's already the second time it happens and I have no clue why...I created a VPN connection profile on an ASA, after a while users report they get the message : Failed to get configuration from secure gateway" when they try to connect I log to...
Yes the port channel is something I wanted to do.My idea is to set the 2nd stack with stack ports/cables and use the fiber ports on 1 of the 2nd stack's switches, do port channel, and connect to one of the switches on the 1st stack.
cheers for that So on ASA A I issue: failover lan unit primary Wait a bit (at that point there are 2 primary?) After a while on ASA Bfailover exec mate failover lan unit secondary
Ah...well then that means someone changed the config, I cant find any other explanation I still want to move the primary to the original ASA, on the ASDM this is the only place I can find that manages primary/secondary settings: Should I move the Pr...
Hey Shawn, It still not clear to me, in case of the primary having a network failure for instance I understand it moves to fail state, and the secondary node moves from passive to active. But is the config changed and the secondary node becomes prima...
Thanks Rob, so the version you advise to upgrade to directly would asa9-12-3-12-smp-k8.bin I can connect to the switches the ASA is connected but do you have any clue what I should look for on the switches?
