Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a Cisco 5510 ASA.I have an inside AD server that has a data directory that I need to update from an outside server.We want to maintain the tightest secirity we can by opening up only the minimum.Thanks--Joe
I have one Windows 2003 server with two NICs, one on the internal Lan the the other to run our Public Wireless Network.On our internal LAN the IP is 192.168.10.#. That Lan can access the Internet through its own gateway.I have a virtual server runni...
If this isn't posted in the right discussion group please let me know and I'll move it.My wireless (outside) is using a Proxy Server called Proxy1 (inside). My initial connection to this Proxy server is on Port 8080. Below is a copy of my logs when...
I am at a remote location and need to change the Gateway for our wireless Vlan. I did not see where I can do this so I am hoping someone can tell me.I have a Cisco ASA 5510I have a Wireless Vlan on ethernet interface 0/0.2It has an IP of 192.168.103...
I have been trying to march to my own drummer but it looks like I can't get that square peg into that round hole no matter how hard is shove. Now it's time to ask the community for some suggestions as to how I might resolve my problem. Just for your...
After I installed the virtual server and connected it to the wireless Vlan. Next I got a laptop and signed on to the wireless network, just like the public would.I started testing to make sure the two networks were isolated.Specifically I tried to R...
1. Windows Server with 2 NICS A. NIC 1 with IP of 192.168.10.### VLAN for Internal Network B. NIC 2 with IP of 192.168.103.5 connects to the 192.168.103.0 VLAN (Wireless)2. VMWARE's Virtual Server runs on the Windows 2003 Box and Host Linux...
Yamil,I tried entering the command static(inside,outside) 159.105.###.20 159.105.###.20 and it keeps telling me the format is incorrect.I did enter this command and it helped a little: route govnet 192.168.103.0 255.255.255.0 159.105.221.201 1I got ...
Yamil,We have a second wireless location that is working properly. I looked in our ASA's Nat entries and pulled out an entry for the working wireless that may be what I need to resolve the"No translation group found for tcp src govnet:159.105.221.11...
Yamil,I really appreciate the time you are taking to help me, but I need to understand what is going on here.Looking at the Series of ASA messages below, I have a couple of questions.03-05-2010 13:42:21 Local4.Info 159.105.2...
