Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am planning on running an Infra firmware upgrade on my current UCS domain. It's currently 3.2(1b) and we are planning the upgrade to 4.0(4e) so we can make use of some new M5 blades. The M5 blades are going to replace the existing M3 and M4 blades ...
Hi All, I've got a customer who is installing some new MDS9132T switches. The bundle they have includes the C9132T with 2 x FAN modules only. The fans are installed into slots 2 and 4 as per the Cisco data sheet. The device though has a big red warni...
I have a customer that is looking to replace their 6296UP FIs with the new 6332-16UP model along with the 2304 IOMs.I found this guide - Migrating to UCS 6300 Series Fabric Interconnects and the UCS 2304 IOM The guide isn't quite as detailed as it w...
Thanks everyone for the responses on this one.While the client was advised it was a bad idea, they decided to go to 4.0(4e) without doing the blades at the same time. Thankfully for them it didn't cause any issues.Thanks.
Apologies the blades are 3.1(2b). I know that's not on the list, but will the system continue to operate at that revision? It's literally for a day or two before we will be replacing the blades anyway... so we don't want to update the firmware if we ...
