Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Please be patient and understand this is not a conventional enterprise setup. My skill set is probably half way CCNA.We have a large scale audio video system (massive multi-way divisible conference room) with Crestron NVX multicast video traffic ...
Hi,I have a stack of c9300s with local DHCP server enabled on it. Here is the DHCP config:ip dhcp excluded-address 192.168.4.1 192.168.4.255!ip dhcp pool 192.168.4.0network 192.168.4.0 255.255.254.0default-router 192.168.4.201
Server works fine with ...
I have isolated network, a stack of 9300s, DHCP server enabled on the switch. I know this isn't common, but I would like to know if it is possible to configure it as a local DNS server. I sent 'ip dns server' and I read that I can probably add my own...
This still works in 2025 and with 9300; 17.11.01.Couple notes that may help folk it the future: *May have to boot from usbflash0: second time, if bootloader needs update (during the first time).*And I just had issues with 3 different flash drives - R...
This is all from the temporary c9200 setup since I have a less confusing /24 subnet. Switch is at 192.168.0.201; ip dhcp excluded-address 192.168.0.1 192.168.0.210!ip dhcp pool 192.168.0.0 //name of poolnetwork 192.168.0.0 255.255.255.0default-router...
