About Muhammad Kamran Shahzad

Muhammad Kamran Shahzad · 02-13-2024

Dear Experts, Looking for solution to implement load balancing which I have done using Rapid-PVST.I have 4 Uplinks in Cisco WS-C3750G-24PS Switch.All traffic is Layer 2 traffic destined towards PPPoE Server behind.I have my clients connected from Int...

Muhammad Kamran Shahzad · 02-11-2024

Dear Experts,Facing 2 Issues.Please read complete thread and advise This is my first experience with Cisco Nexus Switch.I have tried a lot but uplink ports are not getting up but strangely the peer device (laptop or any other device connected to upli...

Muhammad Kamran Shahzad · 01-27-2024

Dear Experts,Can you please advise about below query.I have many Cisco switches in my network.This question I am raising only for referring to 1 Cisco switch and I hope same strategy should be for all cisco switches.WS-C2960S-24TS-SI have 26 Gigabit ...

Muhammad Kamran Shahzad · 04-22-2023

Dear ExpertsMy Uplink provided gave me Layer2 Access Ports (don't know which vlan is that)I have my cisco switchesHow I can configure multiple vlans and send to upstream on Trunk interface ?Please adviseMany Thanks

Muhammad Kamran Shahzad · 04-18-2023

Dear ExpertsAs I have started a topic earlier about STP between Cisco and Huawei then we got the result either we need to user MSTP or Isolate AreasIdea is clear about Primary and Secondary vlansPlease advise If we have multiple Switches in Network f...

Muhammad Kamran Shahzad · 02-13-2024

Hi MHM,Sorry didn't get you on this.I have only switches until PPPoE Server.Below is the traffic route from PPPoE Server to my SwitchPPPoE Server > Upstream Switch 1 > My SwitchPPPoE Server > Upstream Switch 2 > My SwitchPPPoE Server > Upstream Switc...

Muhammad Kamran Shahzad · 02-13-2024

Thanks for calrifications. So if Switch ports are Gig ports and also if flow is same as like in my case flow from different uplinks ports destined towards same PPPoE Server so it will not provide more then 1Gbps throughput even using multiple vlans.A...

Muhammad Kamran Shahzad · 02-13-2024

Hi Joseph,Thanks for reply.I can confirm all of the links are utilizing as per configured STP Pathcost.But switch it self not providing bandwidth more then 1Gbps.So all of the links are active and transmitting packets towards PPPoE Server but switch ...

Muhammad Kamran Shahzad · 02-12-2024

Yes Balaji,Even Laptop directly connected to switch shows Laptop interface up but switch side down.Thanks so advise if we can conclude this switch uplink ports are faulty or bugs with OS ?Because this is first time I am using Nexus and even Interface...

Muhammad Kamran Shahzad · 02-12-2024

Hi Joseph,How do I check this ?what is the purpose of auto MDI ?Thanks

Member Since	‎11-02-2019 06:32 AM
Date Last Visited	‎03-06-2024 12:10 AM
Posts	39
Total Helpful Votes Received	4

User Statistics

User Activity

Layer 2 Load Balancing

First Experience with Cisco Nexus UPLINK Port Issue

UPLINK Bandwidth Calculations

UPLINK Access Port

Private Vlan Configuration Between Multiple Trunk Switches

Re: Layer 2 Load Balancing

Re: Layer 2 Load Balancing

Re: Layer 2 Load Balancing

Re: First Experience with Cisco Nexus UPLINK Port Issue

Re: First Experience with Cisco Nexus UPLINK Port Issue