Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 V35 connection of 2 different ISP with 2 different IP classes.Can i load balance this 2 link with 1 router?I have to connect behind 1 firewall and user the router as firewall's default fw.I don't know if ISPs can support me to use routing pr...
Hi all,can i assign a particular policy to a user that connects to my network with my PIX using VPN Client (which type of VPN Client?) ?I think that i can do that with VPN Concentrator but can i do with PIX too?Or can i assign a particular IPs to my ...
Hi all,my customer has 1 PIX firewall with a CSPM 2.3.3f.Now we have to evaluate an IDS System.I've read that i need 2.3.3i to manage Cisco IDS Sensor. Do you know if a unique version exist?CSPM 3.0 solves my problem?Thank you
Ok, let's do one example.My ISP1 has IP addresses 100.100.100.0/24 and my ISP2 has IP addresses 200.200.200.0/24.Who decides to nat my webserver with ip address 100.100.100.10 instead of 200.200.200.10 if link of ISP2 is down?Often this type of trick...
Thank you,in this way wich IP address i have to configure on the Router Ethernet (as default gw of my firewall)....an IP address of ISP1 or ISP2 or an private class IP and then let doing NAT to the router (setting 2 nat, one for link)?Thank youRegard...
Thank you,but how can i distinguish user by user?how can i tell that the user "rick" has the IP 10.1.1.10 and can go only to 10.1.10.20 and that thet user "richard" can go anywhere?i have to insert user into PIX?Can i use and external DB (like MS Act...
