Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,We are having nothing but trouble with PXE/WDS imaging through a newly installed 3850. Before we installed this switch, we were running our office off a 2921 with a 24port switch module installed. PXE worked just fine with this arrangement ...
You are a legend. Almost 10 years later this post is still helping folks. I just used your instructions today to save a 7965 from the junk pile. Thank you for posting this. Jim
Hi Rick,We have tried separate ip-helper commands for DHCP and PXE servers, no change.DNS resolution worked fine, all clients were able to connect to the internet and use services with no issues.With this being a classified network, I am unable to ru...
Rick,Sorry, I conflated that statement a bit. PXE (and all other servers) are on a /26 subnet in our main datacenter. The PXE clients are on a /27 in a different building. What I meant by "PCs can ping the PXE all day" was that I can have several PC...
Hi Rick,Yes unfortunately the network is classified and I can't post it here. I thought about transcribing some of the 'sh run' output, but the possibility that i would change something or leave something out that might be key to the solution is pret...
Unfortunately I can't post the configs as this is on a classified network. And I know that hampers any help that can be provided.The 3560 is running c3560cx-universalk9-mz.152-4.E2, license ipservices. Not running dot1x or downloadable ACLs. I think ...
