Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
with this sample network design that include the 2 x 2960 switches as access and 1 x 3850 for intervlan with SVI routing between more than 40 VLANs , we have issue with Server connected to left 2960 Switch with PC connected to right Switch both the...
Try to remove link and restart pc that not get ip
Make sure to put speed and duplex on interface
Also debuge ip dhcp traffic to see if any traffic reach ur router
Do i have to assign those vlans also on switch's trunk port or its just enough to make it trunk and that's it.
Trunk by default allow all valns , so there's no assign to trunk we say allow vlan on trunk
But vlan must be in switch
1a) If answer o...
As you said some vlan down
Before connect the switch make sure
1 the switch in vtp transparent mode
2 make these switches with higher spanning root priority
3 make sure trunk is up and notice the interface by looking to lights of interface maybe you...
Nothing wrong with your configure as you do like this topology
You say one pc get the IP second don't
Did you use clouds connected to your pc ? Or you are used qume PC?
You can make sure everything is well by give the PC that not get ip static ip a...
