Thank you Alessio. I really appreciate your time, the tons of material to study and guidance that showed me the possible way to a successful configuration. As soon as I get the working configuration, I'll post the result. Nevertheless, if I got stuck I'll claim for help. Greetings.
... View more
Hi to all, I hope that you can help with the next scenario: I need to configure an EHWIC VDSL/ADSLoPOTS interface card in a 2921 router to link to the ISP which service is an ADSL line with downlink 10 Mbps and uplink 2 Mbps but many questions have arisen, which are: 1. How should I connect the 2921? Since the EHWIC has only one RJ-11 port, the modem is Zhone 6211I3302 with standards ports Line(RJ-11) Phone(RJ-11) USB and LAN(RJ-45). I'm thinking avoid the modem and make a straight connection to the wall's jack through RJ-11 Straight Cable (or should I use RJ-11 Cross Over Cable?). If I cannot avoid the modem, it's obviously that I'll need an Adaptated RJ-45 to RJ-11 Cable; am I correct? 2. When I type show version appears: 2 DSL Controllers. 2 Ethernet Interfaces 3 Gigabit Ethernet Interfaces (These I know are the physical interfaces the router has). 2 ATM Interfaces. 1 Terminal line. Which is the interface that I'm supposed to configure? Is it a controller configurable?. I think the 2 DSL Controllers and the 2 Ethernet Interfaces are bounded one one (or is it the 2 DSL Controllers and the 2 ATM Interfaces, but this last it doesn't make sense to me). 3. What protocol should I configure PPP or PPPoE? I think I should configure PPPoE in the physical interface (when you tell me which one or if can figure it out). 4. How do I configure a logical interface? I thank you to all of you for taking the time to read this and I'll be very grateful for any help that you can give me.
... View more