About ReneRasmussen

ReneRasmussen · 11-10-2010

How do i do this..I have following1 Outside interface x.x.x.x public ips.1 MPLS net interface. 172.17.1.0/241 Inside interface with some Win servers. 172.16.1.0/241 inside interface with som IBM servers. 172.16.2.0/24The ...

ReneRasmussen · 09-09-2010

I have an asa5510 where i havea static nat from one interface to another.i also have a VPN connection to the asa..From the other side of the vpn connection, i cannot acces this Static nat.192.168.170.x is the vpn network.Is it not possible to access ...

ReneRasmussen · 09-07-2010

Hi.I have 1 ASA 5505 at a site, and a 5510 on another site.. on the 5510 i have 4 subnets on diferent interfaces.I have a vpn between the 2 ASA´s , and on the 5510 the local net is defined as all of the subnets i want to have access to,on the 5505 i ...

ReneRasmussen · 08-25-2010

I have setup 2 x ASA 5510 in fail over.Port 0 connects to internet.Port 1 is trunked to 5 vlans on inside.fail over link is on port 3.If i connect the Trunk on the standby asa, the connection to the Primary goes down.If all cables is connectet at sta...

ReneRasmussen · 08-13-2010

I have the following setup.3 Lokations, at each location i have a ASA .I have 2 MPLS networks.. each on its own subnet.I would like to have VPN between all of the ASA´sthat is instead of routing on the mpls, i have the VPN do the routing.I would like...

ReneRasmussen · 11-12-2010

And Again you nailed it.. Works like a charm. Many Many Thanks.But now its working. im trying to understand why..:)I understand the Static on mpls. static (MPLS,outside-WAN) 200.200.200.10 172.26.1.10 net 255.255.255.255what would be what i norma...

ReneRasmussen · 11-11-2010

The Outside is a public interface.. and on that i have a /27 scope.. i want to use one of those ips on outside.. for translate to the172.26.1.10Usualy i would just do a static translate to form say 200.200.200.1 -> mpls 172.26.1.10But as there is no...

ReneRasmussen · 11-10-2010

Thanks KS.. that Worked perfectly.What do i do if i want an public ip from Outside interface nattet to 172.26.1.10 using a 172.16.2.x address.So i can get access to the server on 172.26.1.10 from outside./Rene

ReneRasmussen · 11-10-2010

i cant edit/add to the 172.26.1.x net.. this is handle by 3rd party.. and they will not allow me to acces using any other network then the 172.16.2.0/24 net, But i want to be able to reach 172.26.1.x from 172.16.1.x (which 172.26.1.x does not know of...

ReneRasmussen · 11-10-2010

I need to access 172.26.1.x , from 172.16.1.x but as a 172.16.2.x address, as there is only a return route to 172.16.2.0/24/rene

Member Since	‎08-13-2010 03:06 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	17

User Statistics

User Activity

Nat problem on ASA.

Cannot access static nat addresse over vpn.

Multiple networks in cryptomap not working.

ASA 5510 failover fault.

VPN fail over on seperate mpls networks

Re: Nat problem on ASA.

Re: Nat problem on ASA.

Re: Nat problem on ASA.

Re: Nat problem on ASA.

Re: Nat problem on ASA.