Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We recently purchased a Aironet 1200 and upon bootup I noticed a red display light. I consoled into the AP and saw this boot up message:IAPP: get_ap_dot11_bss_hwidb errorThe Ethernet interface comes up fine and I able to access the web interface as w...
We are building a new infrastructure and are planning to create 10 VLANs (1 VLAN per bus unit) that are all completely indepentant of one another except for a a shared VLAN that allows them to each access files and route to the internet through this ...
If you have a Layer3 switch and you have say 4 VLANS that you are doing heavy stress testing on, what are the constraints per VLAN? Basically is the backplane divided between the VLANS if they are all saturated or does the switch allocated bandwidth ...
We are setting up a Demo environment with redundancy as a priority. I have worked with BGP for multi links with 1 router, but never had an occasion to use two Internet routers with 2 separate links.What is a good practice to allow Internet connectivi...
Greetings,We have 1 layer 3 switch (4006) and a VTP domain with about 6 VLAN's/Subnets. We have 3 other switches with VTP Trunks to the main switch. We also have about 300 users with about 600 nodes. This include various test environments.How impor...
Basically we have two training VLANs that they don't want to have access to the rest of the network, but still have internet access. VLAN 4 and 5 are the Training VLANs. So this should follow this criteria?
Would their be a problem with simly disabling EIGRP and then adding OSPF? All our routing is now done on our Cat 6009 and we no longer have any other routers on our network.
