Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,
I have a query on ASA 5545-X throughput. As per Data sheets, please see below
Stageful inspection throughput (MultiProtocol) - 1.5 Gbps
Triple Data Encryption Standard/Advanced Encryption Standard (3DES/AES) VPN throughput - 400 Mbps
So i...
Hi,
If you want to move a Legacy environment L3 subnet gateway to ACI but still some hosts will be left on legacy. Note- You need to perform it during maintenance.
1.) Create a L3 EPG in ACI with IP subnet need to be moved
2.) Add a physical domain ...
Hi Alexander,
You can go ahead with 2 EPG and single BD, it is a tested working solution.
First EPG with Intra-EPG isolation enabled with all hosts which should not communicate to each other. Second EPG with firewall interface configured as gateway....
Hi,You can use policy based routing to load balance 2 default route with NAT applied, see below article for detailed explanation.https://supportforums.cisco.com/document/32186/dual-internet-links-nating-pbr-and-ip-slaRate the post if find useful. Tha...
HI Nagis, it work in 2 ways. it will remove route from table so even not advertising to neighbor but it will remove from local routing table also. ThanksMahi
