Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi ! I've got following problem within switches in my company, I try to connect to trunk catalyst switch 2950-g but unfortunately I get inconsistent peer vlan message and stp blocks ports on my switch as well as on core one. That leads to some link ...
Hi ! I 've have issues with configuration site to site tunnel between cisco firewall router 2921 with nat and remote host which is vyos.
As to the lab environment, setting up site to site beetwen two cisco routers is pretty easy, but in real life wi...
Hi ! I've got the following problem.
Users from outside network would like to connect to internal network and share windows 2012 resources(run software, files etc)
So it's time to deploy a vpn server, and as I haven't got free license to run it on m...
HI ! My company not long ago bought one of the cisco routers, it is 1921 with security feature. I've setup firewall on it and would like to use vpn feature for remote workers to be able to connect to corporate servers, etc. I choose annyconnect, sinc...
Hi ! Still no luck,
I've setup fa0/1 as trunk
switchport trunk native vlan9
switchport mode trunk
switchport trunk allowed vlan 2,3,9,2-23,
and when I've attached antenna on one side to my trunk port in a switch_2, on my stack switch on the other s...
Hi ! I guess I've found it. (NO PROVIDER HERE - you asked)
On my core stack (consists of 3 switches)I have sth like this
interface Port-channel2 description LAGSWUNIFI switchport trunk allowed vlan add 2-3,20-23 switchport trunk native vlan 9
So...
Hi !
I've added hash sha to crypto map (there is no hash1), but after issuing show running-conf I don't see it.
Policy out to self:
policy-map type inspect policy_out_to_self class type inspect ntp pass log class class-default drop log
class-map...
Hi ! Thx, I've made changes to config, but still no luck, I've launched kiwi syslog server to see if sth is blocked but there is not. I've also issued "debug crypto isakmp" but there is no data.
Any ideas ?
Regards,