Upgraded a WS-C2960XR-48TS-I to 15.2(2)E6.Did a reload to install the SoftwareCut the power for about 5 MinutesPowered onThe error returned after about 7 hours and keeps flodding our logserver
Hi,it is possible to add route to our acs 4.1 appl.Our problem, not all connected networks could be arrived by the default gateway.examplenetwork a 30.x.x.x ==> FW1 ==> FW2 ==> ACS 20.x.x.x (network a could be arrived by default gateway)network a 30...
HiI am setting up cisco ACS appliance 113 Server (4.0). GROUPS DEFINED ============== Group 1 : admincentral Group 2 : limited admin Group 3 : education Network device groups NDGs Defined ================================== Swi...
Hello,on a Cisco Etherchannel or LACP Channel, with configured src-dst-mac Balancing, wich algorithm use Cisco IOS for the Port foward desicion based on Source und Destianion MAC Adr. or Source and Dest. IP Adr (for a src-dst-IP Balancing)?Thanks?
Hello Guiseppe,thanks for the answer!I have tested a 2 Channel Link with the 2 Client Mac-Adr., the less significant bit: Client 1: ....3F and Client 2: ....A7, Dest Mac is ....24.In this case Client 1 traffic should be forwarded on Channel-Port 1 an...
