Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am setting up a New WLC9800 with 17.18.5 that will be the controller hosting multiple remote sites. APs are in Flex Local switching and "central authentication unchecked".... PSK and dot1x. it is functional now.basically I duplicated an on-Premi...
Hi,Please advise. I have a stack of three C9200-48PXG on 17.9.3 and i want to upgrade it to 17.18.4 but only one of them gives flash short space error and unable to copy the image. ( install mode )- why only one running out of space ? and i see no f...
Hi,I was not able to ssh into a switch, the consoled in and found out all vty sessions filled out with idle sessions thats why i was rejected to ssh. question is why switch did not end those sessions and exec-timeout did not work?! see details in the...
Hi,few month ago 17.15.5 turned to be the recommended IOS-XE version and now with these vulnaibility there should be an upgrade from it. what do you recommend and advise? 17.18.4, 17.15.6 or anything ?https://sec.cloudapps.cisco.com/security/center/c...
Hi,I have bunch of AP C9136I-B on C9800 code 17.12.6a and the controller warning message saying the current code does not support 2nd radio to be enabled. i can only upgrade up to 17.12.7a for a while as we have 3700 APs too.I need your advise :- is ...
Thanks for your support!to simplify it. consider my concern is only one WLC and only clients roaming within APs in same site, so the issue is when testing on PSK SSID connected to AP-A and moving to AP-B in same location/site and same WLC only differ...
- disable/enable central Authentication are choices that depends on design and other factors like AP load. the setup I deal with has average of 10 active clients per AP and max 25 so having it disable gives the ability of independent APs while WLC is...
lets just put N+1 aside, because i dnt need seamless roaming for it, i only use it when primary fails then the APs assiciates to N+1 and fallback when primary is back up.right now my issue is seamless roaming fails within the same WLC, same tag site ...
