Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a customer that is looking to purchase either a 9506 Directory with 48-port 8Gbps ports or 9148s.He needs NPIV on some ports, and other ports that are non-NPIV.The documentation for NPIV states that NPIV is enable on the 9148 for the whole swi...
I have a PIX running 7.2(3) that I have allowed FTP traffic to a server on the inside interface.The "outside" interface has an ACL configured to allow the FTP/FTP Data traffic using "outside" IP address for the ftp server. A static NAT is also confi...
I have a WLC 2006 running 4.2.130 code with AP1020s.I also have several users that have VMware machines that run various flavors of Linux, etc Virtual Machines on Windows XP Pro.The Windows XP works fine on the wireless. It is the VMWare Virtual Mac...
I have a customer with a 1400 link that had the indoor power injector and power supply stolen.I am ordering the AIR-PWRINJ-BLR1=. Does this come with both the power injector and power supply?If it doesn't come with the power supply what can I order ...
I work for a reseller and am trying to put a demo box together that will include WCS.I am using WCS 3.0 and VMWare 5.0 on a Windows 2000 Advanced Server.I had worked fine on this server before, but doesn't seem to work on the virtual server on the sa...
Thank-you for the reply.Does this mean that if I have NPIV enabled on the switch, I can have an NPIV port and a non-NPIV port on this same switch?It would just be a matter of configuring individual ports for NPIV other ports while other ports are non...
I had an identical problem with my WLC2006 and a converted AP1231G.Found out that the upgrade utility had incorrectly formatted the controller configuration commands. Check your log files in the \log subdirectory of where you have the upgrade tool l...
Thanks for the info. Added it to the order for my customer.Cisco's web site has almost no info on this. I searched for over 2 hours yesterday, trying to see if there was some combination of search parameters that would give me the info or if there ...
