Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can any one tell me device which can be connected to V,35 port of a router and link to two alternate medias i.e DTU and radio modem.Main path should be DTU (Copper link) and on failure should sense radio link.ThanksRaza
I have enable PBR on one of my interfaces of 7513.which decide on basis of source IP block and chosse next hop. My question is what will happen if next hop is unavialable (down).will it go to alternate hop as decided by BGP.( I am running BGP, OSPF i...
I hv 7513 router and VIP card for 16 serial interfaces.Can i enable on any one of interfaces compress stac?How much it effect on CPU and performance?How many interfaces I can enable it w/o affecting perforamance?RegardsRaza Bhutta
HiI still not understand that why cisco docs saysThe next hop router specified in the set clauses must be adjacent to the policy router, sharing a subnetwork with the policy router.Also it is mentioned that CEF should be disabled on interface running...
The question is how would the router know the host is down without some sortof heartbeat.My next question, and this shows my shallow knowledge of PBR, but can thenext-hop be a non-local address? For instance, can router 1 which isconnected to subnet...
Thanks for replyIts mean when we apply PBR on interface ,normal routing will not work for that particular interface i.e OSPF and BGP will not be effective for this interfaceRaza
Thanks for reply I have 6.1 Cisco PIX Firewall Version 6.1(1) pixa# wr net 202.125.128.210:pixa.cfg Building configuration... TFTP write 'pixa.cfg' at 202.125.128.210 on interface 1 Unspecified Error [FAILED] Pls advise.......
Thanks for reply I have 6.1Cisco PIX Firewall Version 6.1(1)pixa# wr net 202.125.128.210:pixa.cfgBuilding configuration...TFTP write 'pixa.cfg' at 202.125.128.210 on interface 1Unspecified Error[FAILED]
