Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have configured 2 WAN Edge routers as a dual router site, each has a dedicated WAN circuit. R1 has public-internet and R2 has biz-internet. I have also configured a tloc extension between the two so that R1 can use R2 biz-internet transport and R2 ...
Hi guysCan an OTV tunnel use Meraki SD-WAN as it's transport/underlay network?If it will successfully work are there any gotchas, I'm thinking MTU will be one.ThanksSledge
Hi GuysIt seems like a simple issue but I can't find documentation for it. I need to order power cables for the following devices.MX250MX95MX85I know some MX require the C15 connector and others require C13. Can you tell me which ones from the list...
I would like to request an API feature to add product types to an existing appliance only network (switch,wireless etc).I know adding switch serial numbers to the network automatically adds switch in the network drop down, but it would be more useful...
HiIs there an API way to add the 'switch' product type to an existing appliance only network. I know adding switch serial numbers to the network automatically adds switch in the network drop down, but is there a way to add it in advance of switch se...
Hi Jeongjun
Thanks for taking the time to reply.
I worked out what the issue was, I had forgotten to bond the WAN interface to the TLOC extension interface on both routers. Once I fixed that each router was able to create control, IPSEC and BFD conne...
The recommended MTU to prevent fragmentation on OTV is 1542, do you know what the maximum MTU Meraki supports on the MX devices LAN and WAN interfaces?
