Hi Reza, Yes I have configured the layer 2 vlans, as you can see: SW1#show vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/5, Fa0/6 Fa0/7, Fa0/8, Fa0/9, Fa0/10 Fa0/11, Fa0/12, Fa0/13, Fa0/14 Fa0/15, Fa0/16, Fa0/17, Fa0/18 Fa0/19, Fa0/20, Fa0/21, Fa0/22 Fa0/23, Fa0/24, Gi0/1, Gi0/2 2 VLAN0002 active 3 VLAN0003 active 10 management active 70 testsvi70 active Fa0/3 80 testsvi80 active Fa0/4 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup Hey Richard I will check the hosts and try disabling the firewall to see if that resolves the issue....
... View more
Hello I have setup two ports with two host conencted to them one with address 10.1.70.2/24 and the other is 10.1.80.2/24. I created two SVIs(VLAN70 = 10.1.70.1/24 and VLAN80 = 10.1.80.1/24). However I am unable to ping the two hosts. Each host can ping each of the SVIs but cannot ping each other. Please help, the following are my configs: Current configuration : 1637 bytes ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname SW1 ! ! no aaa new-model no ip subnet-zero ip routing ! ! ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! interface FastEthernet0/1 shutdown ! interface FastEthernet0/2 shutdown ! interface FastEthernet0/3 switchport access vlan 70 switchport mode access ! interface FastEthernet0/4 switchport access vlan 80 switchport mode access ! interface FastEthernet0/5 ! interface Vlan70 ip address 10.1.70.1 255.255.255.0 ! interface Vlan80 ip address 10.1.80.1 255.255.255.0 ! ip classless ip http server ip http secure-server ! ! control-plane ! ! line con 0 line vty 0 4 privilege level 15 password password no login line vty 5 15 privilege level 15 password password no login ! end Have I configured it correctly? Ip routing is enable but am still unable to get the hosts to ping each other. All host are configured correctly with their ip add and default gateway. Please help??
... View more