Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hardware: 64-bit architecture Software: Windows Vista Home (64-bit) Cisco Hardware: 871w Router Cisco Software: 12.4T Having a challenge with Windows Vista (64) in using the SSL based VPN. Using IE,I can browse to the url, both using DNS name and IP ...
Hey all,We just purchased an 871 and I feel proud to finally say i've setup and have working ipsec vpn (router is the server).The challenge is, my boss' machine is a 64-bit Vista box - and I have discovered the IPSec client will not install.My resear...
Just wanted to run something by the community.Using fakeIPs for the example:ISP IP: 192.168.2.1Our IP Currently: 172.16.0.1Our New IP Range: 12.18.0.1 to 12.18.5Using Cisco IS 12.4T on 871------------------------------------Currently configured DNSFE...
I'm in the learning/testing stages for configuring a 871 for work.No firewall enabled * Easy VPN Server working * NAT - PAT Overload working* Windows XP using PPTP XP client to SBS server working* Outbound HTTP requests are working* Outbound Mail (Ex...
With the following:interface Loopback0 ip address 192.168.199.1 255.255.255.0interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$ ip address 10.0.0.254 255.255.255.0interface Virtual-Template1 type tunnel tunnel mode i...
Some of this is coming back to me.Yes, our DNS are managed by our ISPWe use internal (SBS 2003) server as our local dns that forwards requests to our ISP's DNS server.A dig of our domain name shows the following86400 IN SOA ns1.meganameservers.com. p...
Scenario: Moving from one DSL package to another. New package gives us 5 statics. we now have our own managed router, not just a pass-tru provided by ISP.We have two circuits installed, I am trying to configure the 871 router we purchased to work so ...
Added Note:Since I'm swapping between connections to test after business hours, I decided to test telnet from home to our current working connection.When I telnet to the address, I get connection with a flashing prompt. Pressing enter does nothing - ...
Thanks again Rick for the assistance.I have the VPN working now and can access using \\ip address\share name.I am having problems with firewall in general. According to Firewall in SDM - ACL 101 is set to drop. I think this is the problem. Not sure e...
