Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have a network that consists of 4 RP's and 4 Leaf routers. The main issue I am seeing which is one of the RP's is the following log messageFeb 3 05:57:47.409 UTC: %PIM-1-INVALID_RP_REG: Received Register from router 10.96.45.117 for group 224.0...
Hi Giuseppe, Thanks for your response. Yes there were ACLs configured. The problem was I never configured it originally and the logs were getting filled up with failed RP reg messages. I found the problem this morning. Looking furth...
You may have missed some details. 1.1.1.0 needs to go to ISP A and 2.2.2.0 needs to go to ISP B. makeing R1 the default gateway would send all traffic to ISP A so that will not work.
Vinod, looking at your diagram if 1 firewall dies then the traffic on the switch connected to it has a single point of failure. I suggest you connect each switch to both firewalls. What is the default gateway for the hosts, the routers or the...
Sometimes the commands are hidden, have you tried typing the full command regardless of whether it shows up on the help?ROUTER(config)#controller cellular 0also do a show priv, you will need to be priv 15. The only other way to shut it down is to rem...
Thanks for the diagram Vinod and thanks for the explination, an in depth explination means that we can understand your requirements and give you the right solution.Let's start with the BGP and influencing the traffic coming from the internet back int...
